PVC PIPE BORING
PVC Boring Pipes for Tube Wells & Borewells in Pakistan
Adam Jee manufactures PVC boring pipes in Faisalabad for tube wells, borewells and groundwater projects across Pakistan. Our boring pipes, also known as borewell pipes or tube well casing pipes, line the bore, keep it open and carry water to the pump reliably for farms, homes, factories and water supply schemes.
Whether you need a 6 inch or 8 inch borewell pipe for an agricultural tube well, or plain and slotted pipes for a larger water project, we supply PVC boring pipes in the sizes and quantities your project requires.
PVC Boring Pipe at a Glance
- Product
- PVC boring pipe (borewell / tube well casing pipe)
- Manufactured in
- Faisalabad, Pakistan
- Types
- [Plain (blind) pipe and slotted (strainer) pipe]
- Sizes
- [4 inch to 12 inch]
- Joints
- [Threaded / socket with solvent cement]
- Used for
- Tube wells, borewells, irrigation and water supply bores
- Supply
- Pakistan-wide delivery for dealers, contractors and projects
What Is a PVC Boring Pipe?
A PVC boring pipe is a strong plastic pipe that is lowered into a drilled hole to form the lining (casing) of a tube well or borewell. It stops the walls of the bore from collapsing, keeps soil and sand out of the water, and gives the pump a clear path to draw groundwater.
In the market, the same product is called a boring pipe, borewell pipe, tube well pipe or PVC casing pipe. Unlike steel pipes, PVC does not rust or corrode in water and soil, which is why it is widely chosen for tube wells in Pakistan.
Types of PVC Boring Pipes
A complete tube well normally uses two kinds of pipe, placed in different parts of the bore. [Confirm the types you manufacture.]
Plain (blind) boring pipe
Plain pipe has a solid wall. It forms the casing of the bore through layers where no water should enter, and carries the pump column from the water layer up to the surface.
Slotted (strainer or filter) boring pipe
Slotted pipe has machine-cut slots. It is installed at the water-bearing layer so that groundwater can flow into the pipe while sand and gravel are kept out. The slot design and the number of slotted pipes affect how much water the well can produce.
Key Features and Benefits
- Corrosion and rust free: unaffected by groundwater and soil, so there is no rust in the water.
- Strong and durable: made to withstand soil pressure and the weight of long pipe columns [confirm your pipe class / wall thickness].
- Lightweight: easier to handle, transport and lower into the bore than steel pipes, which saves labour and time.
- Smooth inner surface: allows free water flow and reduces load on the pump.
- Cost-effective: a lower-cost, long-lasting alternative to steel casing for many tube wells.
- Multiple sizes: available for domestic, agricultural and industrial bores.
- Easy to join: compatible with matching joints, fittings and tube well accessories.
Applications of PVC Boring Pipes
- Agricultural tube wells and irrigation bores on farms
- Domestic and community water supply borewells
- Industrial and factory water bores
- Water supply and groundwater development schemes
- Housing societies, farmhouses and commercial projects
PVC Boring Pipe Sizes
Boring pipe size depends on the bore diameter, the pump you will install and the water flow you need. 6 inch and 8 inch borewell pipes are among the sizes most often asked for in Pakistan. [Confirm the sizes you manufacture.]
| Size | Type | Typical Use |
|---|---|---|
| [4 inch] | [Plain / Slotted] | Small domestic bores |
| [5 inch] | [Plain / Slotted] | Domestic and small farm tube wells |
| [6 inch borewell pipe] | [Plain / Slotted] | Agricultural and domestic tube wells |
| [8 inch borewell pipe] | [Plain / Slotted] | Larger tube wells and higher-flow pumps |
| [10 – 12 inch] | [Plain / Slotted] | Large agricultural and industrial bores |
Please contact us for the complete size range, wall thickness and length options.
How to Choose the Right Boring Pipe Size
- Pump size: the casing must be wide enough for the pump to fit inside with comfortable clearance. Check the pump diameter before you decide.
- Water requirement: larger flow needs a larger pump, and therefore a larger casing.
- Bore diameter and depth: the bore must be wider than the pipe, with space for the gravel pack around the slotted section.
- Ground conditions: sandy, loose or collapsing layers need correct casing and slotted pipe placement.
- Pipe class and wall thickness: choose a class suited to the depth and loads of your bore.
Not sure which size or class to choose? Send us your bore details and pump size, and our team will guide you.
PVC vs Steel Casing for Borewells
| Factor | PVC boring pipe | Steel casing |
|---|---|---|
| Rust and corrosion | Does not rust or corrode | Can rust and corrode over time |
| Weight and handling | Lightweight, easy to lower into the bore | Heavy, needs more equipment and labour |
| Cost | Generally lower | Generally higher |
| Water quality | No rust staining | Rust can affect water over time |
| Best suited for | Most agricultural, domestic and general tube wells | Very deep or demanding bores |
For very deep bores or special ground conditions, please consult us or your drilling contractor on the right pipe class.
Installation Best Practices
Correct installation helps your tube well last longer. These are general guidelines; always follow your drilling contractor's advice.
- Inspect every pipe for cracks or damage before lowering it into the bore.
- Keep the bore straight and clean, and make sure it is wider than the casing.
- Lower pipes slowly and evenly. Never drop, hammer or force them.
- Place slotted pipe only at the water-bearing layer, and plain pipe in the remaining sections.
- Join pipes with matching joints, and follow the joint method and curing time [confirm: threaded or solvent cement].
- Fill the gravel pack around the slotted section and seal the top of the bore to prevent contamination.
- Flush and develop the well to clear sand before installing the pump.
- Store pipes flat on even supports, away from heavy loads and long exposure to direct sun.
PVC Boring Pipe Price in Pakistan
The price of PVC boring pipe, including 6 inch and 8 inch borewell pipes, depends on several factors and changes with raw material rates. For an accurate, current price, please send us your requirement.
- Pipe size: diameter and length required
- Wall thickness / class: heavier pipe costs more
- Plain or slotted pipe: and the number of pipes needed
- Quantity and delivery location: bulk orders and distance affect the final rate
Request the latest PVC boring pipe price or call 041-111-232-653.
Our PVC Boring Pipe Range
How to Order PVC Boring Pipes from Adam Jee
- Send us your pipe size, type (plain or slotted), total length and quantity.
- Tell us your delivery location and any pump or bore details.
- Receive our quotation with the latest price.
- Confirm your order, and we arrange dispatch from Faisalabad across Pakistan.
Complete Your Tube Well Setup
Adam Jee also supplies the parts you need around the bore. See our tube well accessories and water pumps, use uPVC pipes for water supply lines, PVC fittings for connections, and solvent cement for strong joints. For irrigation and large-scale projects, explore our HDPE pipes.
Why Choose Adam Jee for PVC Boring Pipes in Pakistan?
Adamjee Plastics Industries Pvt. Ltd. is a Faisalabad-based manufacturer of PVC, uPVC, PPRC and HDPE pipes and fittings. We use carefully selected raw materials, controlled manufacturing and quality checks [add certifications such as PSQCA / ISO only if you hold them]. Our distribution network supplies farmers, drilling contractors, builders, dealers and project owners across Pakistan. You can also read our guide to the top 10 PVC pipe manufacturers in Pakistan.
Frequently Asked Questions
What is a PVC boring pipe used for?
A PVC boring pipe is used as the casing of a tube well or borewell. It keeps the bore open, holds back soil and sand, and carries groundwater to the pump.
What is the price of a 6 inch or 8 inch borewell pipe in Pakistan?
The price depends on the pipe size, wall thickness, length, quantity and current raw material rates. Please request a quote for the latest price from Adam Jee.
What size boring pipe is used for a tube well?
It depends on the bore diameter, the pump size and the flow you need. [6 inch and 8 inch] boring pipes are common for agricultural and domestic tube wells. Contact us and we will help you choose the right size.
What is the difference between plain and slotted boring pipe?
Plain pipe has a solid wall and forms the casing of the bore. Slotted (strainer) pipe has cut slots and is placed at the water-bearing layer, so that groundwater can enter the pipe while sand stays out.
Is PVC better than steel for borewell casing?
PVC does not rust or corrode, is lighter to handle and usually costs less than steel, so it is a practical choice for many tube wells. Very deep bores or special ground conditions may need a different pipe class, so please consult us for your project.
How deep can a PVC boring pipe be installed?
Depth depends on the pipe class and wall thickness, the ground conditions and how the pipe is installed. Share your bore depth with us and we will recommend a suitable class.
How are PVC boring pipes joined?
[Edit to match your product: PVC boring pipes are joined with threaded joints or with sockets and solvent cement. Follow the joint method and curing time to get a firm, straight, leak-resistant column.]
How long do PVC boring pipes last?
Because PVC does not rust or corrode, it can serve for many years when it is correctly installed and used within its pipe class. The life of the well also depends on water quality and ground conditions.
Where can I buy PVC boring pipes in Pakistan?
Adam Jee supplies PVC boring pipes across Pakistan from our Faisalabad facility. Request a quote or call 041-111-232-653.
Need PVC boring pipes for your tube well? Tell us your size and quantity.
Get a Quote for Boring Pipes