PVC FITTINGS
PVC Fittings in Pakistan
Adam Jee manufactures PVC fittings in Faisalabad for water supply, drainage, irrigation and plumbing projects across Pakistan. Our PVC pipe fittings connect, bend, branch and seal pipe lines, so that every joint stays secure, leak-resistant and easy to maintain.
As a Faisalabad-based manufacturer of uPVC pipes and matching fittings, we supply contractors, plumbers, builders, farmers and dealers with a complete piping solution from one source.
PVC Fittings at a Glance
- Product
- PVC (uPVC) pipe fittings
- Manufactured in
- Faisalabad, Pakistan
- Fitting types
- [Elbows, tees, couplers, reducers, end caps, unions]
- Sizes
- [½ inch to 12 inch]
- Joints
- [Solvent cement / rubber ring joint]
- Used for
- Cold water supply, drainage, irrigation and tube well lines
- Supply
- Pakistan-wide delivery for dealers, contractors and projects
What Are PVC Fittings?
PVC fittings are the connecting parts of a PVC piping system. They join pipe lengths, change direction, split a line into branches, reduce or increase pipe size and close off a line end. Without the right fittings, even the best pipe cannot form a working, leak-free system.
Our PVC fittings are made from rigid PVC (uPVC), the same material family as our pipes, so they work together as one system. You can learn more about the material in this overview of polyvinyl chloride (PVC).
Types of PVC Pipe Fittings
Choose the fitting by what it needs to do in your layout. [Confirm and edit this list to match the products you manufacture.]
| Fitting | What it does | Typical use |
|---|---|---|
| [Coupling] | Joins two pipes in a straight line | Extending or repairing a pipe run |
| [Elbow / Bend] | Changes the direction of the line | Turns around walls, floors and corners |
| [Tee] | Creates a branch from the main line | Feeding a second line from a main |
| [Reducer] | Joins pipes of different sizes | Stepping down from a main line to a branch |
| [End cap] | Closes the end of a pipe | Sealing a line or future connection |
| [Union] | Joins pipes so they can be separated again | Pumps, tanks and serviceable connections |
Please contact us for the complete product list, sizes and pressure classes.
PVC Fittings Sizes
Fittings must match the pipe size and pressure class of your line. The size charts below show our available sizes. Click any chart to open it in full size.
Can't find your size? Contact us and our team will help.
Key Features and Benefits of PVC Fittings
- Corrosion and rust free: does not rust, rot or scale like metal fittings.
- Leak-resistant joints: accurate sockets give a firm fit with solvent cement.
- Lightweight: easy to carry, handle and install on site.
- Smooth interior: supports steady flow and reduces friction loss.
- Chemical resistant: stands up well to soil, water and many common chemicals.
- Low maintenance: no painting or coating needed.
- Cost-effective: a durable, economical choice for cold water and drainage systems.
Applications of PVC Fittings
- Cold water supply lines in homes, apartments and commercial buildings
- Drainage and sewer lines in buildings and housing societies
- Agriculture and irrigation pipelines
- Tube well and pump connection lines, together with our PVC boring pipes and tube well accessories
- Water supply schemes and construction projects
How to Choose the Right PVC Fittings
- Match the pipe size: the fitting size must match the outer diameter of your pipe.
- Match the pressure class: use fittings suited to the working pressure of your line.
- Pick the right type: couplings for straight joins, elbows for turns, tees for branches and reducers for size changes.
- Check the joint method: use the same joint type as your pipe [solvent cement / rubber ring].
- Use cold water only: PVC fittings are for cold water. For hot water plumbing, choose PPRC fittings with PPRC pipes.
How to Install PVC Fittings
These are general guidelines. Always follow your plumber or contractor's instructions.
- Cut the pipe square and remove burrs from the cut end.
- Test-fit the pipe into the fitting dry, and mark the insertion depth.
- Clean both surfaces, then apply solvent cement evenly.
- Push the pipe fully into the fitting and hold it for a few seconds.
- Allow the joint to cure fully before pressure testing or use.
- Support the line properly, and protect exposed fittings from long direct sunlight.
PVC Fittings Price in Pakistan
The price of PVC fittings depends on the type, size, quantity and current raw material rates. For an accurate, up-to-date price, please send us your requirement.
- Fitting type and size: larger sizes use more material
- Pressure class: higher classes cost more
- Quantity: bulk and project orders get better rates
- Delivery location: distance from our Faisalabad facility
Request the latest PVC fittings price or call 041-111-232-653.
Complete Your Piping System
Build the full line with products from one manufacturer. Pair these fittings with our uPVC pipes, join them with solvent cement, and add water tanks, water pumps and sanitary accessories as needed. For irrigation and large infrastructure lines, see our HDPE pipes and PE fittings. For electrical wiring, explore our electric fittings. Browse everything on our products page or return to the Adam Jee Pipes homepage.
Why Choose Adam Jee for PVC Fittings in Pakistan?
Adamjee Plastics Industries Pvt. Ltd. is a Faisalabad-based manufacturer of PVC, uPVC, PPRC and HDPE pipes and fittings. We use carefully selected raw materials, controlled manufacturing and quality checks [add certifications such as PSQCA / ISO only if you hold them]. Product standards and the Pakistan Standards (PS) certification scheme are managed by the Pakistan Standards and Quality Control Authority (PSQCA), and our team can tell you which standards apply to your project. Learn more about us, read our guide to the top 10 PVC pipe manufacturers in Pakistan, or visit our blog for more pipe and fitting guides.
Frequently Asked Questions
What are PVC fittings used for?
PVC fittings connect and complete PVC piping systems. They join pipes, change direction, create branches, change pipe size and close off line ends in water supply, drainage and irrigation lines.
What types of PVC pipe fittings are available?
[Edit to match your range: Common types include couplings, elbows, tees, reducers, end caps and unions.] See our product range or contact us for the full list.
How are PVC fittings joined to pipes?
[Edit to match your product: PVC fittings are normally joined to pipes with solvent cement, or with rubber ring joints for larger sizes.] Allow the joint to cure fully before pressure testing.
Can PVC fittings be used for hot water?
No. PVC fittings are designed for cold water. For hot and cold water plumbing, use PPRC fittings with PPRC pipes.
How do I choose the right size PVC fitting?
Match the fitting to your pipe's size and pressure class, and use the same joint method as your pipe. Check our size charts above, or send us your pipe details and we will help you choose.
What is the price of PVC fittings in Pakistan?
The price depends on the fitting type, size, quantity and current raw material rates. Please request a quote for the latest price from Adam Jee.
What is the difference between PVC fittings and PPRC fittings?
PVC fittings are made for cold water, drainage and irrigation, and are joined with solvent cement. PPRC fittings are made for hot and cold water plumbing and are joined by heat fusion.
Where can I buy PVC fittings in Pakistan?
Adam Jee supplies PVC fittings across Pakistan from our Faisalabad facility. Request a quote or call 041-111-232-653.
Need PVC fittings for your project? Tell us your type, size and quantity.
Get a Quote for PVC Fittings